Data set: Enka®Grip&Drain (00.00.004)
| Processes with this flow as input / output | View complete dataset | Download data set as XML file |
|
Type Product flow |
Name Enka®Grip&Drain |
Reference Flow Property Area (qm) |
|
Classification Kunststoffe / Folien und Vliese / Technische Textilien |
Synonyms |
|
General comment Enka®Grip&Drain is a multifunctional geocomposite consisting of 3 or 4 layers that combines veneer stabilization, reinforcement, drainage, filtration and seperation. The upper layer is a 10 mm thick 3D open structure mat which is made of polyamide mono-filaments that are firmly fused. The 3D mat features an open void up to 95 % allowing for soil retention capacity. The middle layer is a reinforcing PET woven geotextile providing tensile strength. The needed strength of the woven is calculated based on project specific needs. The third and down facing layer consists of a polypropylene V-shape structured drainage mat of 4 or 6 mm height that ensures optimal discharge of rain water when it saturates the cover soil. As an addition to this down facing layer there is the possibility to choose an additional polypropylene non-woven layer above or below the drainage core, providing further filtration and separation functionality. All layers are connected by means of stitching. The PET woven geotextile is wider than the structure mat, allowing for an overlap between lanes during installation. The rolls are 5 m wide, saving labor time on the job site. Note: The results table shown in this data set refers to the product Enka®Grip&Drain 7010/300.50PET/5004F/M110PP with the specific mass of 1.25 kg/m^2. |