Flow information
| Data set information | |
| Name | Enka®Grip&Drain |
| Classification |
Class name
:
Hierarchy level
No records found. |
| General comment | Enka®Grip&Drain is a multifunctional geocomposite consisting of 3 or 4 layers that combines veneer stabilization, reinforcement, drainage, filtration and seperation. The upper layer is a 10 mm thick 3D open structure mat which is made of polyamide mono-filaments that are firmly fused. The 3D mat features an open void up to 95 % allowing for soil retention capacity. The middle layer is a reinforcing PET woven geotextile providing tensile strength. The needed strength of the woven is calculated based on project specific needs. The third and down facing layer consists of a polypropylene V-shape structured drainage mat of 4 or 6 mm height that ensures optimal discharge of rain water when it saturates the cover soil. As an addition to this down facing layer there is the possibility to choose an additional polypropylene non-woven layer above or below the drainage core, providing further filtration and separation functionality. All layers are connected by means of stitching. The PET woven geotextile is wider than the structure mat, allowing for an overlap between lanes during installation. The rolls are 5 m wide, saving labor time on the job site. Note: The results table shown in this data set refers to the product Enka®Grip&Drain 7010/300.50PET/5004F/M110PP with the specific mass of 1.25 kg/m^2. |
| Material properties |
|
| Quantitative reference | |
| Reference Flow Property | |
Modelling and validation
| LCI method | |
| Type of flow | Product flow |
| EPD herstellerspezifisches Produkt | Yes |
| EPD Hersteller | |
| EPD Quelle | |
Administrative information
| Data entry by | |
| Time stamp (last saved) | 2024-09-11T09:45:57.612+02:00 |
| Publication and ownership | |
| UUID | 7ef77425-ec6e-4328-aa62-ba6cf9ebce8e |
| Data set version | 00.00.004 |
Flow Properties
| Flow Property | Mean value | Minimum value | Maximum value | Uncertainty distribution type | Relative StdDev in % | Data derivation type / status | General comment |
|---|---|---|---|---|---|---|---|
| 1.0 | 0.0 | 0.0 | 0.0 % |