Process information
| Key Data Set Information | |
| Location | DE |
| Geographical representativeness description | Due to the production location Germany is considered as the geographical reference area. However, environmental effects such as the greenhouse effect can occur with a strong spatial and temporal offset. |
| Reference year | 2021 |
| Name |
|
| Use advice for data set | The sealing membrane should be applied under ceramic tiles and natural stones for perfect waterproofing. The product is suitable for the following typical areas: domestic bathrooms, commercial kitchens, public and domestic shower rooms, and wet areas. The sealing membrane can also be applied on outside balconies and terraces where no living space is situated underneath. |
| Technical purpose of product or process | The sealing membrane should be applied under ceramic tiles and natural stones for perfect waterproofing. The product is suitable for the following typical areas: domestic bathrooms, commercial kitchens, public and domestic shower rooms, and wet areas. The sealing membrane can also be applied on outside balconies and terraces where no living space is situated underneath. |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | LIP Folie G3 is a waterproofing membrane to be applied under ceramic tiles and natural stones. The EPD refers to the specific product. EPD type: Cradle to gate with options, and with modules C1-C4 and module D. Kiwa-Ecobility Experts shall not be liable with respect to manufacturer information, life cycle assessment data and evidence. |
| Scenarios | |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) | |
| Time representativeness | |
| Data set valid until | 2027 |
| Time representativeness description | 2021 annual average |
| Technological representativeness | |
| Technology description including background system | LIP Folie G3 is a 3-ply waterproofing membrane made of polyethylene (PE) membrane and two outer layers of polypropylene (PP) non-woven. The manufacturing is located in Germany [production site code: 001]. The top and non-woven (PP) are already supplied and delivered as a finished product. The non-wovens are laminated to the up and downside during extrusion process of the LDPE sealing layer. Subsequently a logo is printed on the product, and it is cut in size. Finally, the rolls are stacked on reusable pallets and in packed in foil. |
| Flow diagram(s) or picture(s) | |
Modelling and validation
Administrative information
Environmental indicators